Responsibilities:  

1. Achieve & maintain Level II certification per Q2607D 
2. Clean product for inspection per specification 
3. Inspect product to specified work instructions 
4. Assure applicable inspection equipment is in calibration before use 
5. Assure masters are in calibration and visually conforming 
6. Maintain test equipment, accessories and standards 
7. Visually inspect product per work instructions 
8. Maintain cleanliness & orderliness of inspection stations and assure no balls remain from previous inspections 
9. Report set-up and inspection results clearly and accurately 
10. Identify & segregate suspect or nonconforming product and initiate Discrepancy Reports when required  
11. Comply with stamp control procedures 
12. Contact QA or supervision to report equipment problems or suspect process results 
13. Assure lot & sample traceability 
14. Plot results on control charts when required 
15. Read new and revised specifications when mandated 
16. Provide training and assist in preparing work instructions 
17. Cover for vacations as a visual inspector needed 

• Varied postures – sitting, standing, leaning forward, turning side to side, reaching up 
• Transports product from one area to another 
• Use of Hand Carts – pushing, pulling, raising 
• Sitting for 1-4 hours a day
• Standing for 4-8 hours a day 
• Walking, pushing, carrying or lifting up to max. 50 lbs. occasionally 
• Previous experience in manufacturing process 
• Level II Certification (Desired)